+86-028-85255257
Product Description
100G-CFP-10 is Multi-Vendor MSA Compatible 100GBASE-LR4 CFP (Centum Form Factor Pluggable) Transceiver, operating over pair of single-mode optical fiber with four independent optical communication lanes, separated from each other using LAN WDM technology. Module has minimum guaranteed optical budget of 6.3 dB, which in most cases is enough to reach 10 km distance using single-mode cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 100G-CFP-10 uses cooled 4×27.95Gb/s LAN WDM TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) laser transmitters and 4×27.95Gb/s PIN ROSA receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. 100G-CFP-10 module requires Single 3.3V Power Supply and has less then 12W power consumption. Module operates in Standard 0°-70°C temperature range, and has double LC connectors.
100GBASE-LR4 CFP support up to 103.125-111.81 Gbps data rate and such applications as 100G Ethernet (103.125Gbps), Optical Transport Network OTU4 4I1-9D1F (111.81Gbps). 100G-CFP-10 optical transceiver is multi-purpose module used in number of different places in today’s networking environment. Most popular applications are Internet Service Provider (ISP) Fiber to the Home Aggregation and Backbone, Mobile Operator Core Networks, Mobile Backhaul and Data Center networking site interconnections.
Media Type: |
Single-Mode Fiber (SMF) |
---|---|
Connectors: |
Double LC |
TX Wavelength: |
LAN WDM 1310nm |
RX Wavelenght: |
LAN WDM 1310nm |
Minimum Optical Budget: |
6.3 dB |
Maximum Distance: |
10km |
Supported Data Rate: |
103.125-111.81 Gbps |
Supported Applications: |
100G Ethernet (103.125Gbps), OTU4 4l1-9D1F (112 Gbps) |
DDM/DOM: |
Supported |
CDR (Clock and Data Recovery) chip |
Supported |
Transmitter Type: |
DFB Laser |
Tx Wavelength Bandwidth: |
4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Transmit Power Per Lane (Min): |
-4.3dBm |
Receiver Type: |
PIN photodiode |
Rx Wavelength Bandwidth: |
4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Receiver Sensitivity (Min) Each Lane: |
-10.6 dBm |
Receiver Overload: |
Each Lane 4.5 dBm |
Temperature Range: |
Standard 0°-70°C |
Storage Temperature: |
-40° to 85°C |
Relative Humidity: |
0 to 85% |
Power Consumption: |
≤12W |
Power: |
+3.3V |
Chipset: |
MAXIM, MINDSPEED, SEMTECH, Sumitomo |
Compliance: |
CFP MSA, IEC60825-1 Laser Safety Compliant, IEEE 802.3ba 100GBASE-LR4, SFF-8419, CE, RoHS, SFF-8636 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.