×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼

±ê×¼¹âÄ£¿é

  2. Ê×Ò³
  3. ±ê×¼¹âÄ£¿é
  4. SGMII SFP
  5. SGMII SFP¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

SGMII SFP

SGMII SFP¹âÄ£¿é

3.0/5 rating 1 vote

Specifications

  • ²úÆ·ÐͺÅ: FSFP-GSMII-XX
  • ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
  • ·â×°ÀàÐÍ: SFP
  • ´«ÊäËÙÂÊ: 100BASE-FX/1000BASE-X
  • ´«Êä¾àÀë: 0~160KM¿ÉÑ¡
  • ·¢É䲨³¤: 850nm/1310nm/1550nm/BIDI/CWDM/DWDM ¿ÉÑ¡
  • ÎüÊÕ²¨³¤: 850nm/1310nm/1550nm/BIDI/CWDM/DWDM ¿ÉÑ¡
  • ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
  • Êý×ÖÕï¶Ï: ´øDDM/²»´øDDM ¿ÉÑ¡
  • ÎüÊÕѸËÙ¶È: 0~160KM¿ÉÑ¡
  • ÎüÊÕѸËÙ¶È: 0~160KM¿ÉÑ¡

Description

100BASE-FX/1000BASE-X SGMII SFP Transceiver

Features

  1. Build-in PHY supporting SGMII Interface
  2. 100BASE-LX/1000BASE-X operation
  3. 1310nm FP laser and PIN photo-detector
  4. 10km transmission with SMF
  5. Standard serial ID information Compatible with SFP MSA
  6. SFP MSA package with duplex LC connector
  7. With Spring-Latch for high density application
  8. Very low EMI and excellent ESD protection
  9. +3.3V single power supply
  10. Operating case temperature: 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)

Applications

  1. Switch to Switch interface
  2. Switched backplane applications
  3. Router/Server interface
  4. Other optical transmission systems
  5. 100BASE-FX
  6. 1000BASE-X

Standard

  1. Compatible with SFP MSA
  2. Compatible with IEEE 802.3ah-2004

Description

The SFP transceiver is high performance, cost effective modules. It is designed for 100BASE-LX applications of 10km with SMF. The transceiver consists of two sections: The standard SFP part and the PHY part built with SGMII interface.

The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS(or Link)/Disable/Fault information via I2C register access. The standard serial ID information Compatible with SFP MSA describes the transceiver¡¯s capabilities, standard interfaces,  manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA).

¶©»õÐÅÏ¢/Ordering information :

If you cannot find the model you are looking for, please, contact with us.

Package Part No. Fiber Type Data Rate Range Wavelength Optical Components Distance Range/Power Budget Connector Case Temperature range MCU
Function		 Application
SGMII SFP FSFP-GSMII-A MMF 100Mbps 850nm VCSEL/PIN 2km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-B MMF 100Mbps 1310nm FP/PIN 2km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-C MMF 100Mbps 1550nm FP/PIN 2km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-MB MMF 100Mbps 1310nm FP/PIN 2km LC Com./Ind. - FE
SGMII SFP EOLS-1503-MC MMF 100Mbps 1550nm FP/PIN 2km LC Com./Ind. - FE
SGMII SFP FSFP-GSMII-E MMF 1000Mbps 1310nm FP/PIN 2km LC Com./Ind. MCU GE
SGMII SFP FSFP-GSMII-F MMF 1000Mbps 1550nm FP/PIN 2km LC Com./Ind. MCU GE
SGMII SFP FSFP-GSMII-G SMF 100Mbps 1310nm FP/PIN 10km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-H SMF 100Mbps 1550nm FP/PIN 10km LC Com./Ind. MCU FE
SGMII SFP FSFP-GSMII-MG SMF 100Mbps 1310nm FP/PIN 10km LC Com./Ind. - FE
SGMII SFP FSFP-GSMII-MH SMF 100Mbps 1550nm FP/PIN 10km LC Com./Ind. - FE
SGMII SFP FSFP-GSMII-I SMF 1000Mbps 1310nm FP/PIN 10km LC Com./Ind. MCU GE
SGMII SFP FSFP-GSMII-J SMF 1000Mbps 1550nm FP/PIN 10km LC Com./Ind. MCU GE

Search

ÍøÕ¾µØͼ