SFP+ Transceiver 10GBase-ER 10Gb/s CWDM, 40KM

Product Description
F-tone Networks's series optical transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ZR/ZW), which fully compliant with the specification of SFP+ MSA SFF-8431. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are ten center wavelengths available from 1270nm to 1450nm, with each step 20nm. The module is with the SFP+ connector to allow hot plug capability. The single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal to the receiver. This module provides digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472.

Features:
¡ñ Operating data rate up to 10.3Gbps
¡ñ 1550nm EML Transmitter
¡ñ Distance up to 40km over SMF
¡ñ Single 3.3V Power supply and TTL Logic Interface
¡ñ Duplex LC Connector Interface, Hot Pluggable
¡ñ Compliant with SFP+ MSA Specification SFF-8431
¡ñ Compliant with IEEE 802.3ae 10GBASE-ER
¡ñ Compliant with IEEE 802.3ae 10GBASE-EW
¡ñ Compliant with SFF-8472
¡ñ Operating Case Temperature Standard: 0ºC~+70ºC

Applications:
¡ñ 10GBASE-ER at 10.31Gbps
¡ñ 10GBASE-EW at 9.95Gbps
¡ñ 1000 Base-LX Ethernet
¡ñ 8x FC at 8.5Gbps
¡ñ 4x FC at 4.25Gbbs
¡ñ 2x FC at 2.125Gbbs
¡ñ 1x FC at 1.0625Gbps
¡ñ Other optical links

Order Information:

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.