尊龙凯时最新平台登录

EDFA放大器

  2. 首页
  3. EDFA放大器
  4. High Power Variable Gain / Fixed Gain EDFA

标准协议光�？�

兼容协议光�？�

其它种类光器件

手艺支持

High Power Variable Gain / Fixed Gain EDFA

0.0/5 rating (0 votes)

Description

High Power Variable Gain / Fixed Gain EDFA

F-tone's High Power Variable Gain / Fixed Gain EDFA module provides up to 26dBm output power using standard telecom grade single-clad broadband technology. This high output power is critical in applications requiring an improved optical signal to noise ratio (OSNR), such as long repeaterless links, long span masking in multi-span links, and high capacity systems.
Using unique, patented shut-down mechanisms, the High Power EDFA is classified as a Class 1M laser product, even though it can provide output power above 21 dBm. The amplifier contains two fully independent eye safety mechanisms that shut down the amplifier in case of a fiber link disruption due either to opened connectors (including angle-polished) or broken fiber, even at a distance of a few tens of kilometers from the unit.

VG-EDFA

    Features

    Up to 26 dBm output power
    Fixed gain or variable gain configurations
    Laser safety - Class 1M
    State-of-the-art transient suppression

    Applications

    Long repeaterless links
    Low latency links
    Storage area networks (SANs), remote locations, disaster recovery
    Security-sensitive applications
    Improving OSNR in long-haul and ultra-long haul links
    40 Gb/s and 100 Gb/s transmission
    Increasing channel count to 80+ channels


    Specifications

 

Parameter Specifications Remarks
  Min. Max. Units  
Wavelength Range  1529 1565 nm  
Gain Range 3 25 dB For variable gain, 14 dB range can be selected within this range
Gain Accuracy -0.25 +0.25 dB  
Saturated Output Power   26 dBm  
Composite Input Power -12 +23 dBm 35 dB dynamic range of detectors can be shifted to other values
Gain Flatness
(-5 to +70°C peak to peak)		   1 dB 0.7 dB also available
Noise Figure
(max gain, min input power)		   6.5 dB  
Tilt   ±2 dB  
Supervisory Channel Band-pass
(add/drop filters)		 1500 1520 nm  
Optional Gain Transient Suppression, Overshoot/Undershoot (15 dB add/drop) -1 +1 dB  
Gain Transient Suppression Time   400 μsec  
PDG   0.3 dB  AGC mode
PMD   0.3 psec  
Power Supply Voltage   +4.75 +5.25 V  
Operating Case Temperature -5 +70 °C  
Power Consumption    25 W  
Dimensions 100x150x18 mm Without heat-sink
Modes of Operation  AGC, APC, pump power
Communication RS232, I2C

 

Search

网站地图