400G 10km OSFP Optical Transceiver

Product Description
F-tone Networks’s OSFP transceiver module is designed for use in 400 Gigabit Ethernet links over 10km single mode fiber with FEC. The module has 8 independent electrical input/output channels operating at 53.125Gbps per channel. The integrated GearBox in module converts the 8 channels of 53.125Gbps (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 106.25Gbps (PAM4) operation for an aggregate data rate of 400Gbp/s. The optical side of transceiver consists of 4 independent channels on CWDM4 1271/1291/1311/1331nm center wavelength. The electrical interface of the module is compliant with the 400GAUI-8 interface as defined by IEEE 802.3bs, and compliant with OSFP MSA.

Features
¡ñ Supports 425Gbps
¡ñ Single 3.3V Power Supply
¡ñ Up to 10km over SMF
¡ñ Duplex connector
¡ñ OSFP MSA compliant
¡ñ PIN and TIA array on the receiver side
¡ñ Power dissipation < 10W
¡ñ Case temperature range: 0°C to 70°C(commercial)
¡ñ I2C interface with integrated Digital Diagnostic Monitoring
¡ñ Safety Certification: TUV/UL/FDA
¡ñ RoHS Compliant

Applications
¡ñ 4 x 100G-LR4 applications
¡ñ Data center

±¾²úƷΪFT-AMϵÁУ¬½öչʾ²¿·Ö²ÎÊý£¬ÈôÓÐÐèÒª£¬ÇëÁªÏµ×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼¡£
×¢£º±¾²úÆ·ÓÐÌìϲú»¯ÐͺſÉÑ¡
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.