×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

2x100GBASE-SR4 QSFP DD Optical Transceiver

2x100GBASE-SR4 QSFP DD Optical Transceiver

0.0/5 rating (0 votes)

Description

2x100GBASE-SR4 QSFP DD Optical Transceiver

Features

¨ 8 channels full-duplex transceiver modules

¨ Transmission data rate up to 26Gbps per channel         

¨ 8 channels 850nm VCSEL array

¨ 8 channels PIN photo detector array

¨ Internal CDR circuits on both receiver and transmitter channels

¨ Support CDR bypass

¨ Low power consumption <4W

¨ Hot Pluggable QSFP DD form factor

¨ Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF

¨ MPO24 connector receptacle

¨ 3.3V power supply voltage

¨ RoHS 6 compliant(lead free)

¨ Case operating temperature

   Commercial:0 ~ +70¡æ

             Industrial: -40 ~ +85¡æ

Applications

¨ IEEE 802.3bm 100GBASESR4

Description

The F-tone Networks TechnologiesFTQD-2H-SR4xx is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density  for 2x100Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates eight data lanes in each direction with 8x25.78125Gbps bandwidth. Each lane can operate at 25.78125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber.These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 24 fiber MTP (MPO) connector. This module incorporates F-tone Networks Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

 

Ordering information

Part Number

Product Description

FTQD-2H-SR4

QSFP DD, 2x100GBASE-SR4,70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF,0ºC ~ +70ºC

FTQD-2H-SR4I

QSFP DD, 2x100GBASE-SR4,70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF,-40ºC ~ +85ºC

 

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.

Search

ÍøÕ¾µØͼ