100GE CFP optical transceiver modules are designed for use in 100 Gigabit Ethernet links and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39). Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and Application Note AN-2080. The optical transceiver is RoHS compliant as described in Application Note AN-2038.

Features
¡ñ Hot-pluggable CFP form factor
¡ñ Supports 103.1Gb/s and 112Gb/s aggregate bit rate
¡ñ Power dissipation <16W
¡ñ RoHS compliant
¡ñ Single 3.3V power supply
¡ñ Maximum link length of 10km on Single Mode Fiber (SMF)
¡ñ 4x28Gb/s DFB-based LAN-WDM transmitter
¡ñ 10x10G MLD electrical interface
¡ñ Duplex LC receptacles
¡ñ MDIO management interface
¡ñ Commercial case temperature: 0°C to 70°C

Applications
¡ñ OTN OTU4 4I1-9D1F & OTUC1 (FOIC1.4)
¡ñ 100GBASE-LR4 100G Ethernet

×¢£º±¾²úÆ·ÓÐÌìϲú»¯ÐͺſÉÑ¡
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.