CFP 100GBASE-SR10 / OTU4 Parallel Optical Module:Designed to support the IEEE 100GBASE-SR10 link specification; the newly developed F-tone 100G CFP transceiver provides increased port density and total system cost savings. The F-tone CFP module has a single MPO port which connects to an industry standard 2x12 multi-mode fiber cable. One 2x12 multi-mode optical fiber cable terminated with MPO optical connectors connects two CFP modules.

CFP Dual 40GBASE-SR4 / OTU3 Parallel Optical Module:pictureDesigned to support the IEEE 40GBASE-SR4 link specification; the newly developed F-tone Dual 40G CFP transceiver offers 2 independent 40G Ethernet links in one CFP slot. The F-tone CFP transceiver has two MPO ports which connect to industry standard 12-fiber multi-mode fiber cable. Both MPO ports will inter-operate with equipment using 40GBASE-SR4 QSFP transceivers.

10km OTU4/100G Ethernet CFP2 Optical Transceiver Module (CFP2-100G-LR4),F-tone¡¯s CFP2-100G-LR4 100G CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39).

Coherent CFP2-ACO 100G/200G Transceiver£ºThe 100Gb/s coherent CFP2 pluggable transceiver, enabled by F-tone Networks¡¯s industry leading InP technology, represents the next generation of high performance optical modules designed for a variety of DWDM lineside applications. The analog coherent CFP2 module offers significant advantages over existing solutions in terms of reduced power dissipation and increased density with the added benefit of pluggability for reduced first installed cost.

100G CFP to QSFP28 Adapter£º×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼100G CFP to 100G QSFP28 Adapterת½ÓÆ÷ʵÏÖCFP½Ó¿Ú£¨10X10Gbps£©ÓëQSFP28½Ó¿Ú£¨4X25Gbps£©Ë«Ïòת»»£¬Öª×ãIEEE 802.3ba 100GBASE-LR4ºÍIEEE 802.3bm 100GBASE-SR4ЭÒ飬×î´ó¹¦ºÄµÍÓÚ4W£¬Ö§³ÖÇ°Ïò¾À´í±àÂ루FEC£©¡¢Êý×ÖÕï¶Ï£¨DDM£©¹¦Ð§¡£Îª100GÒÔÌ«ÍøºÍµçÐÅÍøÌṩ¸ßÐÔÄÜ¡¢ÈȲå°Î»¥Áª¼Æ»®¡£ ÂÄÀúÖ¤£¬½ÓÄÉ100m OM4¶àÄ£¹âÏ˾ÙÐд«Ê䣬¸ÃÄ£¿éʵ²â¹¦ºÄµÍÓÚ2.3W£¬²¢ÀÖ³ÉʵÏÖ4СʱһÁ¬ÊÂÇéÁãÎóÂë¡£

CFP4-100G-SR4£ºF-tone Networks¡¯s 100Gb/s transceiver module for optical communication applications compliant to 100GBASE-SR4 of the IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of VCSEL optical signals over 4 multimode fibers for 100Gb/s optical transmission. Reversely, on the receiver side, the module receives 4 channels of VCSEL optical signals over 4 multimode fibers and then converts them to 4 output channels of electrical data.The high speed VCSEL transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 100m links over OM4 multimode fibers and compliant to optical interface with IEEE802.3bm Clause 95 100GBASE-SR4 requirements.